SHDEFCIRCLE
(Statement)
Sets the condition for searching a circle.
SHDEFCIRCLE <Clearance>, <Width>
<Clearance>
Designates the clearance between pads for the circle search (1 to 10).
<Width>
Designates the pad width for the circle search (1 to 10).
-
This instruction is a temporary setting, so the initial value is not permanently changed.
-
For this instruction, a µVision board (option) is required.
-
If a large clearance is set, it is only slightly affected by disturbances in detection but detection accuracy lowers.
-
The initial values set at the factory prior to shipping are as follows: clearance = 1 and width = 3
|
SHDEFCIRCLE 1,3
|
|