HOME
ID : 5889
Allocation Mode Available with the I/O Conversion Box
Using the I/O conversion box requires mounting an optional parallel I/O board that covers the short of signal lines on the standard mini I/O port for compatibility with the RC5 controller.
The table below lists the permitted combination of I/O extension boards and selectable allocation mode.
| No | I/O extension boards | Allocation | |||
|---|---|---|---|---|---|
| 1st | 2nd | I/O-Box (Standard) |
I/O-Box (Compatible) |
I/O-Box (All user I/O) |
|
| 1 | Parallel I/O board | - | ○ | ○ | |
| 2 | Parallel I/O board | DeviceNet Slave | ○ | ○ | |
| 3 | Parallel I/O board | DeviceNet Master | ○ | ||
| 4 | Parallel I/O board | CC-Link Slave | ○ | ○ | |
| 5 | Parallel I/O board | PROFIBUS Slave | ○ | ○ | |
| 6 | Parallel I/O board | EtherNet/IP Adapter | ○ | ○ | |
| 7 | Parallel I/O board | PROFINET I/O Device | ○ | ○ | |
| 8 | Parallel I/O board | EtherCAT Slave(I/O) | ○ | ○ | |
ID : 5889