HOME
ID : 37
Encoder Backup Battery Box
The encoder backup battery box contains the following.
- Encoder backup batteries 2 pieces
- 4th-axis CALSET bolt
- Fuses for signal wiring (CN24-Flange CN)
- Fuses for signal wiring (CN20-CN21) （For “Communication Interface Flange-A” type only）
VS-050/060
VS-068/087
Tightening Torque
| Cover | Standard type robots (IP40) | 0.6 +/- 0.1 Nm |
|---|---|---|
| Other than standard type (IP40) | 1.6 +/- 0.2Nm | |
| Fuse Plate | 0.6 +/- 0.1 Nm | |
Robots other than standard type (IP40) have an O-ring on the inside of the cover. Take care not to break the O-ring.
ID : 37