HOME
ID : 2645
Requirements for the Cable Selection
Use an Ethernet cable that meets the following requirements.
| Outer diameter of the Ethernet cable | 5 to 9.7 mm |
|---|---|
| Diameter of an internal wire (including insulation) | 0.75 to 2 mm |
| Insulation material | PVC/PE/PP |
| Maximum retry of wire insertion to terminal slit | Up to 10 times (only the same wire is allowed.) |
| Minimum diameter of an internal wire core | 0.1 mm |
If you use any core cable that uses fluorine-containing insulation materials, such as PTFE, ETFE, FEP, it may lead to the conductivity failure.
ID : 2645