ID : 5475

COMMAND-SLAVE FUNCTION GUIDE

Command-Slave function is a function that controls robot by means of PLC programming language with establishing connection between PLC and RC8 controller through high speed field network. This function is available from Ver.2.5.* or later.

For detailed information, refer to manuals shown below.

Manufacturer	PLC name	Manual
SIEMENS	SIMATIC S7-1500	Command-Slave Application Guide_SIEMENS-S7 Command-Slave Reference Guide_SIEMENS-S7
Rockwell Automation	Rockwell Automation PLC	Command-Slave Application Guide_Rockwell Command-Slave Reference Guide_Rockwell
CODESYS	CODESYS-equipped PLC	Command-Slave Application Guide_CODESYS Command-Slave Reference Guide_CODESYS
ProConOS	ProConOS-equipped PLC	Command-Slave Application Guide_ProConOS Command-Slave Reference Guide_ProConOS

ID : 5475

Related Information: COMMAND-SLAVE FUNCTION FOR SIEMENS SIMATIC S7-1500; COMMAND-SLAVE FUNCTION FOR Rockwell Automation; COMMAND-SLAVE FUNCTION FOR CODESYS; COMMAND-SLAVE FUNCTION FOR ProConOS