HOME
Warning and Caution Labels
The robot unit has warning and caution labels pasted as shown below. They alert the user to the dangers of the areas on which they are pasted. Be sure to observe the instructions printed on those labels.
| Warning and caution labels on the controller | Contents |
|---|---|
|
Warning label 1 |
(For maintenance of the controller) Risk of electrical shock. Never open the controller cover when the power is ON. Never touch the inside of the controller for at least 3 minutes even after turning the power OFF and disconnecting the power cable. |
|
Warning label 2 |
(For controller power switch) Risk of injury. Be sure to perform lockout/tagout before starting servicing. Turning the power ON may move the arm, causing injuries if a person is inside the safety fence. |
|
Caution label |
The controller is not designed to be dust-, splash-, or explosion-proof. Before installation, be sure to read the user's manual. Do not put anything on the controller or apply any impact or shock to it. |
|
Caution label |
DO NOT insert fingers or foreign objects into openings. Doing so may cause bodily injury. When using an external power source, never apply the voltage not specified. Doing so can result in a controller failure. |
Caution label
|
After turning the power switch OFF, do not turn it ON for at least six seconds. |
