Next >>

I/O CONVERSION BOX

Mounting an optional parallel I/O board on the RC8 controller (Safety I/O less spec.) and connecting the I/O conversion box allows the signals fed to the "INPUT connector (CN8)", "OUTPUT connector (CN10)" and "I/O POWER connector (CN7)" on the RC5 controller to be used as is in the RC7M controller.This function is available in Ver.1.8.6 or higher of RC8 Controller.

For the Pin Assignment on Connectors when the I/O conversion box is connected, refer to the "RC5 CONTROLLER INTERFACE MANUAL".

  • The power supply setting (internal or external) and transistor type (NPN or PNP) need to be the same in between the Mini I/O and Parallel I/O.
  • I/O conversion box is not applicable to the standard type RC8 controller.

        Next >>