HOME
ID : 11109
Daily Inspections
Before starting operations, check the items listed below every day.
Inspections to be Made with the Power OFF
| Check item | How to check | Criterion | What to do (See note below) |
|---|---|---|---|
| Connectors | Visually | No looseness, disengagement or dirt | Engage the parts properly and clean them. |
| Cables | Visually | No damage or gouges | Repair or replace. |
Inspections to be Made with the Power ON
| Check item | How to check | Criterion | What to do (See note below) |
|---|---|---|---|
| LCD on the Smart TP | Visually | Properly displayed. | Repair or replace. |
| Pilot lamps on the controller | Visually | Should light. | Repair or replace. |
| Cooling fan in the controller | Hold up a hand to the exhaust port and check the wind is blowing off. | Should work properly. | Repair or replace. |
| Emergency Stop button on the smart TP or the mini pendant | Press the EMERGENCY STOP button. | The motor should come to an emergency stop. | Repair or replace. |
| Safety door | Operate the safety door switch and open the switch-wiring door. | The motor should come to an emergency stop. | Inspect or repair. |
Some of the repair and replacement operations shown in "What to do" column may involve special work. Contact the DENSO Robot Service Section.
ID : 11109