The Basic Procedure of Overhead-mounting 3

11

Using the forklift, set the robot unit fixed to suspension jigs in the specified position on the robot mount, then secure it to the robot mount with M12×40 bolts (strength class: 12.9).

Bolt tightening torque : 128 ±26 Nm

12

While supporting the robot unit with the forklift, remove the bolts fastening the holder stopper plates.

13

Using the forklift, remove suspension jig C only from the robot unit.

14

Remove suspension jigs A and B from the robot unit.

15

Confirm that the robot unit is secured to the robot mount. Then, the installation procedure is complete.