The Basic Procedure of Overhead-mounting 2

6

Slowly lower the hook of the crane until the robot unit turns upside down.

Caution The robot unit will turn by its own weight as you lower the crane hook. This is not trouble, so do not touch the robot unit itself.

7

Using the holder stopper plates attached to suspension jig C, join suspension jigs B and C together.

Bolt tightening torque : 71 ±14.2 Nm

8

On the other side, join suspension jigs A and C together using the other holder stopper plate in the same way as in Step 7

9

Confirm that the robot unit is secured to the suspension jigs.

10

Using a forklift, transport the robot unit fixed to suspension jigs to the robot mount.