<< Prev        Next >>

ID : 3337

HM/HMS-W-UL Series (Dust- & Splash-proof Type, UL-Listed)

Please refer to this if the figure is not clear.(PDF:386KB)

Note 1: Pins #1 to #24 on CN21 and those on CN20 are connected with each other. The maximum rated current per line is 1A.

Note 2: Use the attached connector set for CN20 and CN21.

Connector set part No. Part No. Model and name

Appearance

410889-084*

410877-064*

(for CN20)

CE01-6A24-28SC-D(D69)
(Straight plug)

(DDK Electronics, Inc.)

 

410877-065*

(for CN20)

CE01-24BS-DS
(Straight backshell)

(DDK Electronics, Inc.)

 

410877-066*

(for CN20)

CE3057-16A-1-D
(Cable clamp)

(DDK Electronics, Inc.)

Applicable wire diameter φ15 to 19.1

 

410877-067*

(for CN20)

CE3057-16A-4-D
(Cable clamp)

(DDK Electronics, Inc.)

Applicable wire diameter φ19.1 to 21

410877-047*(*1)

(for CN21)

WEBSP2524AM-1-D(R1)
(Straight plug)

(DDK Electronics, Inc.)

Applicable wire diameter φ12.5~16

*1: The connector design was changed in May 2019. As these connectors are interchangeable, either connector can be used for robot connection. However, applicable wire diameter is different from the old and new models. If you use a new connector, select a cable that satisfies the applicable wire diameter listed in the above table.

ID : 3337

<< Prev        Next >>