ID : 4656

Quarterly Inspections

Check Items and Lubrication

Check the items listed below every three months.

Quarterly Inspections Table

No.	Check:	Controller Power	How to check:	Criterion	What to do:
1	Robot base mounting bolts	OFF	Measure the tightening torque with a torque wrench.	No looseness. Specified torque: 128 ±20 Nm	Tighten the bolts to the specified torque.
2	Cooling fan filters in the robot controller	OFF	Visually	No dust or dirt.	Clean the cooling fan filters.

No.

Check:

Controller Power

How to check:

Criterion

What to do:

Robot base mounting bolts

OFF

Measure the tightening torque with a torque wrench.

No looseness.

Specified torque:

128 ±20 Nm

Tighten the bolts to the specified torque.

Cooling fan filters in the robot controller

OFF

Visually

No dust or dirt.

Clean the cooling fan filters.

For the cleaning procedures of the air intake filter, refer to the RC8 SERIES ROBOT CONTROLLER MANUAL, "Cleaning Intake Port Filter".

ID : 4656