HOME
ID : 4735
HS-4555*
| Item | Specifications | |||
|---|---|---|---|---|
| Model name of robot system (Note 1) |
HS-4555* (Standard)
HS-4555*-W (Dust- & splash-proof) HS-4555*-P (Cleanroom) HS-4555*-UL (UL-Listed) |
|||
| Model name of robot unit |
HS-4555*M (Standard) HS-4555*M-W (Dust- & splash-proof) HS-4555*M-P (Cleanroom) HS-4555*M-UL (UL-Listed) |
|||
| Overall arm length | 325 (J1: 1st axis) + 225 (J2: 2nd axis) = 550 mm | |||
|
Motion angle and stroke |
J1 (1st axis) | ±155° | ||
| J2 (2nd axis) | ±145° | |||
| Z (3rd axis)(*) |
* = 2 : 200 mm * = 3 : 320 mm |
|||
| T (4th axis) | ±360° | |||
| Axis combination | J1 (1st axis) + J2 (2nd axis) + Z (3rd axis) + T (4th axis) | |||
| Maximum payload | 5 kg | |||
| Composite speed | At the center of the hand mounting flange | 7,100 mm/s | ||
| Z and T |
Z (3rd axis): 2,000 mm/s T (4th axis): 2,400°/s |
|||
|
Position repeatability (Value at the constant ambient temperature.) |
J1 + J2 | ±0.02 mm | ||
| Z | ±0.01 mm | |||
| T | ±0.005° | |||
| Maximum force-fit | 98N (one second or less) | |||
| Maximum allowable moment of inertia around T axis | 0.1 kgm2 (with 5 kg payload) | |||
| Position detection | Absolute encoder | |||
| Drive motor and brake |
AC servomotors for all axes
Brakes for Z axis (3rd axis) and T axis (4th axis) |
|||
| Brake releasing | Models except UL-Listed ones |
|
||
| UL-Listed models |
|
|||
| User air piping | 4 systems (φ4x2, φ6x2) | |||
| User signal lines | 19 (for proximity sensor signals, etc.) | |||
| Air source | Operating pressure | 0.05 to 0.35 MPa | ||
| Max. allowable pressure | 0.59 MPa | |||
| Degree of protection |
Standard type: IP20 Dust- & splash-proof type: IP65 |
|||
|
Clean level for cleanroom type (FED-STD-209D) |
Class 10(0.1μmm):use point | |||
|
Airborne noise (A-weighted equivalent continuous sound pressure level) |
80db or less | |||
| Weight | Approx, 25kg (55 lb) (See the name plate on each model) | |||
Note1: The model name of robot set refers to the model of a complete set including a robot unit and robot controller. An asterisk (*) in model names denotes the Z-axis stroke.
ID : 4735