<< Prev        Next >>

ID : 7080

Specified Program Reset (100)

Function

This command immediately stops and also initializes the program of the program number specified in data area.

Format

Command Area (3 bits, input)

100

Data Area (3 bits, input)

Program number: The program number to be reset.

If the number "n" is specified in data area, resets PRO n.

Description

This command can reset the programs for PRO 0 to PRO 7.

One of the following operations takes place according to the operating status of the program.

  • When the specified program is terminated (stopped), nothing will happen.
  • When the specified program is step-stopped or immediately stopped (halt), it will be initialized. The initialized program will resume from the beginning.
  • When the specified program is running, it will immediately stop (halt) and also be initialized. If started after the stop, the stopped program will resume from the beginning.

ID : 7080

<< Prev        Next >>