ID : 5639

Quarterly Inspections

Check the items listed below every three months. Turn OFF the controller power before checking the items.

Check:	How to check	Criterion	What to do
Robot mounting bolts	Measure the tightening torque with a torque wrench.	No looseness. Specified torque is met (Refer to "Installing Robot Components".)	Tighten the bolts to the specified torque.
Slideways of the robot	Refer to "Grease Lubrication".
Controller cooling fan filters	Visually	No dust or dirt.	Clean the cooling fan filters. (Refer to "Cleaning Intake Port Filter".)

Check:

How to check

Criterion

What to do

Robot mounting bolts

Measure the tightening torque with a torque wrench.

No looseness.

Specified torque is met (Refer to "Installing Robot Components".)

Tighten the bolts to the specified torque.

Slideways of the robot

Controller cooling fan filters

Visually

No dust or dirt.

Clean the cooling fan filters. (Refer to "Cleaning Intake Port Filter".)

ID : 5639