Operation Procedure

Program a movement of the electric vacuum generator and move it accordingly using the following procedure:

1. Point data setting
2. Programming
3. Program execution

1. Point Data Setting

Launch the hand window and set point data using Remote TP or Virtual TP. 
For details about the setting method, refer to "Point Data Setting."

This operation is not required if the motion direction and the vacuum pressure are directly specified by a command.

2. Programming

In a robot program, write a command using the preset point data. 
If you do not use point data, specify the motion direction and vacuum pressure with a command.

For details, refer to "Programming."

3. Program Execution

Executing the robot program moves the electric vacuum generator according to the program description.