HOME
ID : 17
Coding Information of Robot Model
The robot model is coded as shown below.
Model No.
Robot Name
VS Vertical, articulated robot
Arm Length
050A3 505 mm
060A3 605 mm
068A4 680 mm
087A4 875 mm
Since ***A1 and ***A2 robots are not compatible with RC7M controller exclusively, these robot cannot be operated by the RC8 controller.
Installation Type
A Omnidirectional
No. of Axes
V6 6 axes
Ingress Protection
NN Standard type (IP40)
W4 Dust- & splash-proof type (IP54)
W7 Protected type (IP67)
C5 Clean room type (ISO class5)
C3 Clean room type (ISO class3)
Safety Standard Compliance
N Standard
UL UL-Listed model
Detail
Connector Panel
N Rear connector panel
A Bottom connector panel
Flange
N Standard flange
A Communication interface flange-A (Ethernet)
Signal Lines & Air Piping
N Standard
A 2 x solenoid valves (2 positions, Double Solenoids)
B 3 x solenoid valves (2 positions, Double Solenoids)
C 3 x solenoid valves (3 positions, Exhaust Center Solenoids)
D 3 x solenoid valves (3 positions, Closed Center Solenoids)
Paint/Surface Finish
N Denso standard colors
A Unpainted
ID : 17