Warning and Caution Labels

The robot unit has warning and caution labels pasted as shown below. They alert the user to the dangers of the areas on which they are pasted. Be sure to observe the instructions printed on those labels.

Location of Labels

(1) Label

Serious injury can result from contact with the robot if it is running. Never enter the motion space when the robot is running or the power is ON.

When entering the motion space for troubleshooting, be sure to cut off power to the robot motors by activating the emergency stop device, etc.

(2) Label

When transporting the robot unit, hoist it with a crane in a posture shown above.

(3) Label

When performing 4th-axis CALSET, be sure to follow the instructions given in the manuals. When you rotate the 4th-axis manually, rotate it slowly and do not add strong force, as this will break the wiring inside the robot unit.

(4) Label

Surface can become very hot depending on the usage condition.

(5) Label

Danger of electrical shocks.
Do not remove any connectors or covers while power is applied.