<< Prev        Next >>

ID : 930

Warning and Caution Labels

The robot unit has warning and caution labels pasted as shown below. They alert the user to the dangers of the areas on which they are pasted. Be sure to observe the instructions printed on those labels.

Location of labels

Warning and caution labels on the robot unit Additional description

Label 1

Contact with the robot unit which is in motion can cause serious injuries. Observe the following:

  1. Never enter the robot's restricted space when the robot is in motion or the motor power is on.
  2. When you need to enter the robot's restricted space for recovery from robot failures, be sure to cut the power to the robot motors by activating an emergency stop device or the like.

Label 2

This label is precaution in case of detaching the cover.
This label is attached only for the robot equipped with screw-ropout prevention washers.
Cover fixation screws are equipped with screw-dropout prevention washers.
With pullng the cover, loosen each four cover fixation screws evenly so as not to drop screw-dropout prevention washers mounted on the back of the cover.


In case of dropping washer from the screw, please purchase a new washer.
Do not re-use the dropped one.(Part No.410831-134*)

ID : 930

<< Prev        Next >>