HOME
ID : 1206
Information on Standards
Applied standards differ depending on the type of robots and controllers as below.
Controller Series: RC8A
| Code | Controller code representing the applied standards is "NI" or "NM" | Robot code representing the applied standards is "U", and controller code representing the applied standards is "UI" or "UM" |
|---|---|---|
| Applied standards |
|
|
| Standards certified by a third party |
|
|
| For information of the certificate, refer to "this file (PDF:692KB)" or "this website". | For information of the certification, refer to "this website". | |
| Marks of standards and regulations to be affixed to products |
|
|
| Declaration of Incorporation | For information of the Declaration of Incorporation, click "here (PDF:56KB)". | For information of the Declaration of Incorporation, click "here (PDF:56KB)". |
The CE marks are applied to the manipulator and controller in accordance with the following Directives.
- EMC Directive 2014/30/EU
- RoHS Directive 2011/65/EU, (EU) 2015/863
Note that industrial robots are categorized as partly completed machinery in Machinery Directive 2006/42/EC. Therefore, the CE marks do not correspond to the Machinery Directive.
For details of the codes, see below.
- Details of robot codes: Refer to "Safety Standard Compliance" described in "Coding Information of Robot Model" of "HSA1 SERIES USER'S MANUAL".
- Details of controller codes: Refer to "G: Compliant standards" described in "Controller Type" of "RC8 SERIES ROBOT CONTROLLER MANUAL".
 |
The manipulator and controller comply with the UKCA marking even if no UKCA marks are applied to them. For shipments to the UK, the information identifying importer accompanies the product. |
Controller Series: RC8
| Code | Controller code representing the applied standards is "NI", "NM", "UI", or "UM" |
|---|---|
| Applied standards |
|
| Marks of standards and regulations to be affixed to products |
|
| Declaration of Incorporation | For information of the Declaration of Incorporation, click "here (PDF:56KB)". |
The CE marks are applied to the manipulator and controller in accordance with the following Directives.
- EMC Directive 2014/30/EU
- RoHS Directive 2011/65/EU, (EU) 2015/863
Note that industrial robots are categorized as partly completed machinery in Machinery Directive 2006/42/EC. Therefore, the CE marks do not correspond to the Machinery Directive.
- Details of controller codes: Refer to "G: Compliant standards" described in "Controller Type" of "RC8 SERIES ROBOT CONTROLLER MANUAL".
ID : 1206