Installation

• Place the protective box Light indoors.
• Place the protective box Light on a horizontal plane.
• Keep a space of at least 150 mm at the top opening of the protective box Light.

Upright Installation

When placing the protective box Light in the upright position, please purchase a stand set (option).

The stand set supports the protective box Light shipped after July, 2019. To check whether the protective box Light supports the stand set, check the part number of the protective box Light.

The part number of the protective box Light is "410181-020*". Actually, the number is entered in asterisk "*".

• "1" or larger in "*" (e.g. Part No. : 410181-0201)
  The protective box Light was shipped after July, 2019. This supports the stand set.
• "0" in "*" (Part No. : 410181-0200)
  The protective box Light was shipped before July, 2019. This does not support the stand set.

The protective box Light has screw holes to mount a stand set. There are four screw holes for each side, so customers can choose the side to mount a stand set by customers.

• Stand set (sold separately)

The external dimensions of the protective box Light when using a stand set are shown in the figure below.

Installation Procedure

1

Remove four screws of the side to install the protective box Light.

Then, with the rubber washer and the hexagon socket head bolts that come with the stand set, fix the protective box Light and the stand. Put the rubber washer on both side of the stand (refer to the figure below), fix four screw holes (φ6.5) with the hexagon socket head bolts.

Recommended torque : 3N･m

2

Place the protective box Light fixed with the stand to the installation position. As same as the installation in horizontal position, keep a space of at least 150 mm at the top opening of the protective box Light.

Put M8 screws for fixing through the screw holes (φ10), fix with four screws to the floor.

Screws to fix to the floor are not provided. Please prepare the screws by customers.