ID : 5185
Input Data (Standard Allocation)
Port No. | Signal name |
---|---|
512 | Step Stop (All tasks) |
513 | - |
514 | Halt (All tasks) |
515 | Strobe Signal |
516 | Interruption Skip |
517 | - |
518 | - |
519 | Command data area odd parity |
520 | Data area 1, bit 0 |
521 | Data area 1, bit 1 |
522 | Data area 1, bit 2 |
523 | Data area 1, bit 3 |
524 | Data area 1, bit 4 |
525 | Data area 1, bit 5 |
526 | Data area 1, bit 6 |
527 | Data area 1, bit 7 |
528 | Data area 2, bit 0 |
529 | Data area 2, bit 1 |
530 | Data area 2, bit 2 |
531 | Data area 2, bit 3 |
532 | Data area 2, bit 4 |
533 | Data area 2, bit 5 |
534 | Data area 2, bit 6 |
535 | Data area 2, bit 7 |
536 | Data area 2, bit 8 |
537 | Data area 2, bit 9 |
538 | Data area 2, bit 10 |
539 | Data area 2, bit 11 |
540 | Data area 2, bit 12 |
541 | Data area 2, bit 13 |
542 | Data area 2, bit 14 |
543 | Data area 2, bit 15 |
544 | Command area, bit 0 |
545 | Command area, bit 1 |
546 | Command area, bit 2 |
547 | Command area, bit 3 |
548 | - |
549 | - |
550 | - |
551 | - |
552 | User input(*) |
: | |
767 | |
4096 | User input(*) |
: | |
7871 |
*The range of the I/O port numbers available to user inputs varies depending on the input size setting. The range is set from 552 to 767 by default (with the input size set to 32). If the input size is set to 33 or larger, the user inputs to be assigned to I/O port numbers after 767 will be assigned to the port numbers starting from 4096. For example, if the input size is set to 33, user inputs will be assigned to the I/O port numbers 552–767 and 4096–4103.
ID : 5185