<< Prev        Next >>

ID : 5398

VS-6577/6577-B

Item

Specifications

Standard type

With brakes

Model name of robot system (Note 1)

VS-6577 VS-6577-B

Model name of robot unit

VS-6577M

VS-6577M-B

Overall arm length

365 (first arm) + 405 (second arm) = 770 mm

Arm offset

J1 (swing): 75 mm

J3 (front arm): 90 mm

Maximum motion area

R = 934 mm (end-effector mounting face)

R = 854 mm (Point P: J4, J5, J6 center)

Motion range

J1 : ±170°

J2 : +135°, -100°

J3 : +169°, -119°

J4 : ±190°

J5 : ±120°

J6 : ±360°

Maximum payload

7 kg (Note 2)

Maximum composite speed

7,600 mm/s (at the center of an end-effector mounting face)

Position repeatability (Note 3)

In each of X, Y and Z directions: ±0.03 mm

Maximum allowable inertia moment

Around J4 and J5: 0.413 kgm2

Around J6: 0.063 kgm2

Position detection

Absolute encoder

Drive motor and brake

AC servomotors for all joints, Brakes for joints J2 to J4 AC servomotors for all joints, Brakes for joints J2 to J6

User air piping (Note 4)

7 systems (φ4x6, φ6x1), 3 solenoid valves (2-position, double solenoid) contained.

User signal line

10 (for proximity sensor signals, etc.)

Air source

Operating pressure 0.10~0.39MPa
Maximum allowable pressure 0.49MPa

Degree of protection

IP40

Airborne noise (A-weighted equivalent continuous sound pressure level)

80 dB or less

Weight

Approx. 36 kg (80 lbs) (See the name plate on each model.)

Note 1: The model name of robot set refers to the model name of a complete set including a robot unit and robot controller.

Note 2: If the payload exceeds 6 kg, the robot unit must be used with the flange facing down at ±45 degrees from vertical.

Note 3: Position repeatability is the value at constant ambient temperature.

Note 4: Only the φ4x6 air piping system may be controlled by built-in solenoid valves.

ID : 5398

<< Prev        Next >>