HOME
ID : 5400
VS-6577-P10/6577-BP10
|
Item |
Specifications |
||
|---|---|---|---|
| Standard type | With brakes | ||
|
Model of robot system (Note 1) |
VS-6577-P10 | VS-6577-BP10 | |
|
Model of robot unit |
VS-6577M-P10 | VS-6577M-BP10 | |
|
Overall arm length |
365 (first arm) + 405 (second arm) = 770 mm |
||
|
Arm offset |
J1 (swing): 75 mm J3 (front arm): 90 mm |
||
|
Maximum motion area |
R = 934 mm (end-effector mounting face) R = 854 mm (Point P: J4, J5, J6 center) |
||
|
Motion range |
J1 : ±170° J2 : +135°, -100° J3 : +169°, -119° J4 : ±190° J5 : ±120° J6 : ±360° |
||
|
Maximum payload |
7 kg (Note 2) |
||
|
Maximum composite speed |
7,600 mm/s (at the center of an end-effector mounting face) |
||
|
Position repeatability (Note 3) |
In each of X, Y and Z directions: ±0.03 mm |
||
|
Maximum allowable inertia moment |
Around J4 and J5: 0.413 kgm2 Around J6: 0.063 kgm2 |
||
|
Position detection |
Absolute encoder |
||
|
Drive motor and brake |
AC servomotors for all joints, Brakes for joints J2 to J4 | AC servomotors for all joints, Brakes for joints J2 to J6 | |
|
User air piping |
6 systems (φ4x6), 3 solenoid valves (2-position, double solenoid) contained. |
||
|
User signal line |
10 (for proximity sensor signals, etc.) |
||
|
Air source |
Operating pressure |
0.10～0.39MPa |
|
| Maximum allowable pressure |
0.49MPa |
||
|
Weight |
Approx. 36 kg (80 lbs)(See the name plate on each model.) |
||
|
Clean class for cleanroom type (FED-STD-209D) |
Class 10 (0.1μ) at point-of-use |
||
Note 1: The model name of robot set refers to the model name of a complete set including a robot unit and robot controller.
Note 2: If the payload exceeds 6 kg, the robot unit must be used with the flange facing down at ±45 degrees from vertical.
Note 3: Position repeatability is the value at constant ambient temperature.
ID : 5400