HOME
ID : 7495
Error Code List
For Eight-digit Error Codes (Hexadecimal)
Refer to "ERROR CODE" of "RC8 Series Robot Controller User Manuals".
For Four-digit Error Codes (Hexadecimal)
| Error code (hexadecimal) | Description |
|---|---|
| FF01 | The robot controller did not respond for two or more seconds. |
| FF02 | Multiple Command-Slave AOIs that cannot be executed simultaneously were executed at the same time. |
| FF03 | The Command-Slave AOI was executed when the robot controller is not ready for motion. |
| FF04 | The Command-Slave AOI was executed when the Command-Slave function of the robot controller is not enabled. |
| FF11 | The value of the input variable "Override" exceeds the valid range (1 to 100). |
ID : 7495