ID : 10566

Cabling Procedure

Each I/O cable connects to the applicable connector inside of the robot controller. To connect them, you need to open the front panel of the robot controller beforehand.

The following shows the overall procedure of each I/O cable connection. For details about each step, refer to the link.

Order/ Operation/ Link destination
1 Open the front panel. -->How to Open the Front Panel
2 Pull out cables from the cable multi-outlet plate, connect each I/O cable to the applicable connector in the robot controller. -->How to Pull Out Cables
3 Close the front panel. -->How to Close the Front Panel.

Order/ Operation/ Link destination

1

Open the front panel.

-->How to Open the Front Panel

2

Pull out cables from the cable multi-outlet plate, connect each I/O cable to the applicable connector in the robot controller.

-->How to Pull Out Cables

3

Close the front panel.

-->How to Close the Front Panel.

ID : 10566

<< Prev Next >>