HOME
ID : 1471
Overview
Mounting a CC-Link remote device board in the robot controller enables the controller to communicate with various CC-Link-compliant field devices of many manufacturers.
As a remote device for serial communications compliant with the open network CC-Link, the controller can easily exchange I/O data.
CC-link remote device board is compatible with CC-Link Ver.1.10 and Ver2.00. Use this board according to the network system you use. (CC-Link Ver.2.00 is available from Ver.1.8.6 or later.)
Operating Environment
To use a CC-Link remote device board, you need to prepare an expansion board (CC-Link remote device board) and a function expansion license certificate. For details, refer to "Options for Robot Controller" and "Optional Function and License".
Expansion Board
The table below lists the configuration of CC-Link remote device board.
CC-Link remote device board is installed in a PCIe slot which is one of an expansion slot in the robot controller. Mini-I/O connector kit is used as an input signal of the safety circuit.
| No. | Components | Remarks | ||
|---|---|---|---|---|
| 1 |
CC-Link remote device board
(including No. 2 through 4) |
Product form ;
• Shipped after mounted on the controller with license • Shipped separately as a spare part with license • Shipped separately as a spare part without license |
||
| 2 |
Mini I/O connector kit | Connector : PCR-E68FS (Manufactured by HONDA TSUSHIN KOGYO CO., LTD.) Connector cover : PCS-E68LPA-1E (Manufactured by HONDA TSUSHIN KOGYO CO., LTD.) |
||
| NPN-type | Pin assignment | Configuration of Safety Circuit | ||
| PNP-type | Pin assignment | Configuration of Safety Circuit | ||
| 3 | Ferrite core | |||
| 4 | Banding band | |||
|
||||
Software License for Function Expansion
To enable the optional function on the robot controller, you need to purchase a license certificate.
| Component |
|---|
| License certificate for CC-Link remote device board |
- A license certificate is sold with an expansion board as a set, or is sold individually.
- To purchase a license, a serial number of the robot controller is required.
ID : 1471