Mounting the CALSET jig on the 4th axis (T-axis)

To CALSET the 4th axis (T-axis) or all axes, you need to mount the CALSET jig on the axis beforehand according to the procedure shown below.

1

Fit a stopper pin in the CALSET jig.

2

Mount the CALSET jig on the 4th-axis (T-axis) flange as shown below.

The CALSET position of the 4th axis (T-axis) refers to the point where the stopper pin (shown below) comes into contact with bolt A by turning the 4th-axis (T-axis) flange.