Index
HM SERIES USER'S MANUAL
> Specifications of the Robot Unit
> Names of Robot Unit Components
> Names of Axes (Joints) of the Robot Unit
> HMS-4070*-W-UL /HMS-4A70*-W-UL
> HMS-4085*-W-UL /HMS-4A85*-W-UL
> Outer Dimensions and Workable Space of the Robot Unit
> HM Series Robot Unit (Floor-mount, Standard type)
> HM-W Series Robot Unit (Floor-mount, Dust- & splash-proof type)
> HMS Series Robot Unit (Overhead-mount, Standard type)
> HMS-W Series Robot Unit (Overhead-mount, Dust- & splash-proof type)
> HM-UL Series Robot Unit (Floor-mount, UL-Listed)
> HM-W-UL Series Robot Unit (Floor-mount, Dust- & splash-proof type UL-Listed model)
> HMS-UL Series Robot Unit (Overhead-mount, Standard type, UL-Listed model)
> HMS-W-UL Series Robot Unit (Overhead-mount, Dust- & splash-proof type, UL-Listed model)
> HM/HMS Series (Standard type)
> HM/HMS-UL Series (UL-Listed)
> HM/HMS-W, HM/HMS-W-UL Series (Dust- & splash-proof type)
> Instructions for Using Splash-proof Connector Sets (for CN20,CN21)
> Engineering-design Notes for Robot Hands
> Positioning Time of HM4060*/HM-4A60*
> Positioning Time of HM4070*/HM-4A70*
> Positioning Time of HM4085*/HM-4A85*
> Positioning Time of HM40A0*/HM-4AA0*
> Positioning Time of HM-4060*-W/HM-4A60*-W
> Positioning Time of HM-4070*-W/HM-4A70*-W
> Positioning Time of HM-4085*-W/HM-4A85*-W
> Positioning Time of HM-40A0-W/HM-4AA0*-W
> Stopping Time and Distance (Angle) at an Emergency Stop
> HM-4060* series/HM-4060*-W series
> HM-4070* series/HM-4070*-W series
> HM-4085* series/HM-4085*-W series
> HM-40A0* series/HM-40A0*-W series
> HM-4A60* series/HM-4A60*-W series
> HM-4A70* series/HM-4A70*-W series
> HM-4A85* series/HM-4A85*-W series
> HM-4AA0* series/HM-4AA0*-W series
> Preparing a Proper Environment for Installation
> Transporting the Floor-Mount Type
> Transporting the Overhead-Mount Type (HMS series)
> Installing the Robot Controller
> Electrical Wiring and Air Piping of the Robot Unit
> Notes for Wiring and Piping Through a Hollow in the Z-axis Shaft
> Reference Drawings for Stays that Clamp Wiring and Piping
> Reference Drawing for Stay 1
> Reference Drawing for Stay 2
> Reference Drawing for Stay 3 and 4
> Prohibition Against Use of Mechanical End Bolts and Mechanical Stoppers for Wiring or Piping
> Adjusting the Air Balance Cylinder
> Installing the Flange Kit(Option)
> Setting the Control Set of Motion Optimization
> Setting Robot Installation Conditions
> Moving Each Axis with Motor Power OFF in Emergency Stop
> Changing the Software Motion Limits
> Changing Software Motion Limits
> CALSET
> Mounting CALSET Bolts on the 4th Axis
> Maintenance & Inspection Intervals and Purposes
> Replacing the Encoder Backup Battery
> Setting the Next Battery Replacement Date
> Checking the Odometer and Trip Meter
> Checking the Controller ON-Time and the Robot Running Time and Resetting Their User Counters
> Warranty
> HM40602
> HM40603
> HM40604
> HM40A02
> HM40A03
> HM40A04
> HM4A602
> HM4A603
> HM4A604
> HM4AA02
> HM4AA03
> HM4AA04

