HOME
ID : 1778
Display Setting for Pendant
Operation path : [F6 Setting] - [F3 Pendant and Panel] - [F2 Pendant Setting]
Set character size and font to display on the pendant screen.
Press [F2 Pendant Setting] to display the following [Pendant Settings] window.
The setting can be changed by directly touching ON / OFF characters (point size character for font size) of each item.
Change each setting, and press [OK] in [Pendant Settings] window to confirm the changed setting.
Reduce the ambient noise to less than the beep sound of the buzzer of the teach pendant/mini-pendant, if you use the buzzer as a warning when the robot passes near the singular-point (singularity) in Auto mode.
| Keys other than function keys | |
|---|---|
| Fontsize | Select the display font size of the teach pendant (10 point or 12 point). |
| Bold | ON state makes the display font style bold. |
| Display PrintMsg | Display or hide the dialog at the PrtMsg command execution. (Display: ON, Hide: OFF) |
| Buzzer near a Singular-Point at AutoMode | Turn ON (sound) or OFF (mute) the beep sound which sounds when the robot passes through the vicinity of the singular point in Auto mode. In the Manual mode or the Teach check mode, beep sound is always ON regardless of this setting. |
| Screen saver (Ver.2.0.*or higher) |
Selecting ON enables and OFF disables the screen saver. |
| Display lights-out (Ver.2.0.*or higher) |
Selecting ON enables and OFF disables the display lights-out. |
| Screen saver / Display lights-out (Ver.2.0.*or higher) |
Set the start timing of the screen saver and / or display lights-out. Specify the length of time before screen saver and / or display lights-out starts after the last display operation by minutes. (1 to 9999) |
ID : 1778