HOME
ID : 5182
Project Property Setting
To use a EtherNet/IP Adapter board as an I/O expansion board, you need to register the following information from WINCAPSIII.
From the [Project] menu, point to [Property] to open the Property window, and then click. [I/O] tab. For details, refer to "Configuring a Project".
Assign
Device
| Setting value | |
|---|---|
| Device | "EtherNet/IP Adapter" or "[Parallel] + [EtherNet/IP Adapter]" |
Mode
"Standard" indicates the Standard mode, and "Compatible" indicates the RC3 Compatible mode. For details about allocation modes, refer to “Functions in Individual Allocation Modes ”.
| Setting value | |
|---|---|
| Mode | "Standard" or "Compatible" |
Options MiniIO
Power Source
If the total maximum capacity of Mini I/O, Hand I/O and Parallel I/O is 1.3 A or lower, the internal power source is available.
| Setting value | Defalt setting | |
|---|---|---|
| Power source | "External" or "Internal" | External |
Options EtherNet/IP Adapter
Input / Output Size
For about the size of IO, refer to “How to Calculate I/O Points of User I/O". I/O can be added or removed by one byte; this will determine the maximum number of I/O.
| Mode | Setting value (byte) |
Defalt setting(byte) | |
|---|---|---|---|
| Input size | Standard | 5～499 | 32 |
| Compatible | 5～501 | ||
| Output size | Standard | 4～500 | 32 |
| Compatible | 4～500 |
Communication Speed
Select the speed according to the network communication configuration.
| Setting value | Description | Defalt setting | |
|---|---|---|---|
| Communication Speed | Auto Negotiation | The transmission rate is automatically configured according to the connected devices. | Auto Negotiation |
| 100M Full Duplex | 100Mbps Full Duplex | ||
| 100M Half Duplex | 100Mbps Half Duplex | ||
| 10M Full Duplex | 10Mbps Full Duplex | ||
| 10M Half Duplex | 10Mbps Half Duplex |
IP Address
When setting the IP address for EtherNet/IP, choose either getting the IP address automatically from DHCP or designating it. When designating the IP address, set the IP address, subnet mask, and gateways.
| Setting value | Setting value for detail items |
|---|---|
| Obtain an IP address automatically | - |
| Use the following IP address | -IP address -Subnet mask -Gateway IP address |
ID : 5182
- Related Information
- How to Calculate I/O Points of User I/O
- I/O Allocation