HOME
ID : 4790
Semiyearly Inspections
Apply the specified grease to the whole Z-axis shaft as shown below every six months.
| No. | Lubrication points | Lubricant type | Lubricant amount | Remarks |
|---|---|---|---|---|
| 1 | Z-axis shaft | Epinoc AP1 | 2 to 3 cc | Apply the grease to the whole Z-axis shaft. |
|
|
||||
When applying grease to the dust- & splash-proof type or cleanroomtype, you need to pull up and down the upper and lower bellows on the Z-axis shaft, respectively.
ID : 4790