ID : 4860

Quarterly Inspections

Check Items and Lubrication

Check the items and lubricate your robot as listed below every three months.

No.	Check:	Controller power	How to check:	Criterion	What to do:
1	Robot base mounting bolts	OFF	Measure the tightening torque with a torque wrench.	No looseness. Use specified tightening torque. (Refer to "Securing the Robot Unit".)	Tighten the bolts to the specified torque.
2	Rotary sections and slideways of the robot	OFF	Apply the specified lubricants to the specified points. (Refer to "Lubrication Jobs".)
3	Cooling fan filters in the robot controller	OFF	Visually	No dust or dirt.	Clean the cooling fan filters.

No.

Check:

Controller power

How to check:

Criterion

What to do:

Robot base mounting bolts

OFF

Measure the tightening torque with a torque wrench.

No looseness.

Use specified tightening torque.
(Refer to "Securing the Robot Unit".)

Tighten the bolts to the specified torque.

Rotary sections and slideways of the robot

OFF

Apply the specified lubricants to the specified points.
(Refer to "Lubrication Jobs".)

Cooling fan filters in the robot controller

OFF

Visually

No dust or dirt.

Clean the cooling fan filters.

For the cleaning procedures of the air intake filters, refer to the RC8 SERIES ROBOT CONTROLLER MANUAL, "Cleaning Intake Port Filter".

ID : 4860