ID : 5621

Transport

This chapter contains a description of transporting the robot unit.

Before handling or installing the robot unit, be sure to read SAFETY PRECAUTIONS, "Installation Precautions 1" and this chapter.
Do not pick up the robot unit by the cables. The robot unit may be broken.
The Y axis and the S axis which is unscrewed the slide stop bolt move since no brake is equipped. Be careful so that hand or finger does not get caught by an axis or cableveyor.

The way of taking out the robot from the package and the way of transportation differ according to the robot type. Refer to the explanation below before transportation.

Robot type	Maximum weight	Refer to
LZNN and LZZN	9 kg	Taking out and Transport of LZ** robot
LYZN and LYZZ	12 kg	Taking out and Transport of LYZ* robot
LSNN and LSSN	13 kg	Taking out and Transport of LS** robot
LZSN and LZSS	16 kg	Taking out and Transport of LZS* robot

Transport Method

Make sure that everything is ready for installation.
When the package is opened, the robot is placed on its back. Take out the robot as shown in the photograph about "how to take out the robot". After taking it out, transport it as shown in the photograph about "how to transport the robot".
Secure a sufficient passage space and make sure that there is no obstacle or hazard on the way.
Fix the robot on the mount by referring to "Installation ".
[ For S axis only ]
Unscrew the slide stop bolt on the S axis. See the blue arrow shown in Taking Out and Transport of LS** Robot.