<< Prev        Next >>

ID : 4810

Robot Unit Components and Motion Direction

The figure below shows the names of the components of the robot unit and the motion direction of each axis.

  • The flange and the whole of the 1st axis may be coated with rust preventive oil which does not affect the robot function. If spattering of the oil could be a problem when the robot is in use, wipe it off before use.
  • If any axes do not move, or move but only a little, the oil coating on the bearing of axes may not be formed sufficiently, it could leading to the early wear off.
    To prevent early wear-off of bearings, move the target axes in sufficiently large angle for more than a few times a day.
 

ID : 4810

<< Prev        Next >>