<< Prev        Next >>

ID : 2422

Warning and Caution Labels

The robot unit has warning and caution labels pasted as shown below. They alert the user to the dangers of the areas on which they are pasted. Be sure to observe the instructions printed on those labels.

Location of labels
Warning and caution labels on the robot unit Additional description

Label 1

Contact with the robot unit which is in motion can cause serious injuries. Observe the following:

  1. Never enter the safeguarded space when the robot is in motion or the motor power is on.
  2. When you need to enter the safeguarded space for recovery from robot failures, be sure to cut the power to the robot motors by activating an emergency stop device or the like.

Label 2

There is a high voltage part.

This label alerts the user to the dangers of electrical shocks.

Label 3

 The figure shows how to hoist a robot.

Label 4

Do not apply strong force on the external cable unit. NEVER do the following operations. Doing so will damage the external cable unit.

  • Carry the robot with gripping the external cable unit.
  • Move the robot with pushing the external cable unit.

This label does not prohibit users from touching the external cable unit. It simply prohibits users from applying strong force on the unit. Therefore, you may touch the unit when you lay cables or pipes on it.

Label 5

If the brake release switch is pressed while the controller is on, the Z-axis will drop.

  1. Do not press the brake release switch except in an emergency.
  2. Before pressing the brake release switch, ensure that there is no risk of injury or damage to equipment.

This label is attached only to the new HSR model. Although this label is not attached to the old HSR model, be sure to follow the precautions above.

ID : 2422

<< Prev        Next >>