HOME
ID : 3091
Instructions for Using Splash-proof Connector Sets (for CN20, CN21, Ethernet)
The splash-proof connector sets for CN20 and CN21 and Ethernet assure the splash-proofness as long as they are properly assembled and connected.
When using those connector sets, be sure to observe the following notes.
- The degree of protection of the splash-proof robot unit is assured as long as the splash-proof connectors are joined with connectors CN20 and CN21 and Ethernet on the robot unit. If there is no connection on CN20 and CN21 and Ethernet, the splash-proof rating is not assured.
- Use a sheathed cable for a splash-proof connector. Using an unsheathed cable cannot assure the splash-proof rating.
- Each connector set should be assembled according to the instructions specified by the connector manufacturer.
For information about the assembly procedure of each connector set (for CN20, CN21 and Ethernet), please refer to the following links. The actual assembly procedure should be in accordance with the instructions specified by the connector manufacturer.
ID : 3091