<< Prev        Next >>

ID : 4204

Data Transfer through USB Memory

Instead of direct data transfer between a computer running WINCAPSIII and the COBOTTA, you can use a USB to exchange data.

To send/receive data to/from a USB, from the menu bar, click File, click [Save Project]/[Open Project].

Data Transfer from the COBOTTA to WINCAPSIII

By using a COBOTTA, store WINCAPSIII data to a USB memory. Data is written to the RcProject folder in the USB memory.
Copy the written data and paste it into the folder which manages WINCAPSIII project by using Windows Explorer.

For more details about writing data to/reading data from the USB by COBOTTA, refer to "Displaying and Reading Project List" on TP App Operation Guide.

Data Transfer from WINCAPSIII to the COBOTTA

Create ReProject folder on USB memory beforehand.
Copy WINCAPSIII project data and paste it into RcProject folder in the USB memory by using Windows Explorer.

If the COBOTTA model of the project is not identical with the used COBOTTA model, the data cannot transfer to the COBOTTA.

ID : 4204

<< Prev        Next >>