HOME
ID : 2450
Piping of Source Air
The robot unit is equipped with four air pipes (two of φ4 and two of φ6 in diameter) for controlling hands. The maximum of the source air pressure is listed below.
Apply dry air to the robot unit.
| Maximum of source air pressure | 0.59 MPa |
|---|
Supply dry air filtered through an air filter (Recommended filtration rating: 5 µm or below).
Before piping, blow the air tube out with dry air to clean out the inside (flushing); otherwise, any chips, cutting oil, dust or dirt remaining in the air tube may result in a damaged valve.
Air Piping of the Robot Unit
Standard Type, Bellows Type
 |
Dust- & Splash-proof Type, Cleanroom type, H1 grease type
 |
ID : 2450