ID : 7386

MC_SetZforce

Specify the thrust force for current limiting function of the third axis (Z axis) in H Series Robot and enable.

Graphic expression	AOI category
	Motion

Input and Output Variable

Variable name	Data type	Valid range	Conditions for Input and Output
AxesGroup	eRC_AxesGroup		-
AxesGroup	Robot group Specify a robot variable (structured type data : eRC_AxesGroup) of user-defined type.

Input Variable

Variable name	Data type	Valid range
Execute	Boolean	TRUE : Start FALSE : -
Execute	Execution start When the variable is changed from FALSE to TRUE, this AOI is executed.
SettingValue	Real	0 or larger
SettingValue	Thrust force Specify the thrust force. Unit is "N".

Output Variable

Variable name	Data type / Description
Done	Boolean
Done	Execution completion confirmation TRUE : This AOI execution is completed. FALSE : This AOI execution is not completed.
Busy	Boolean
Busy	Processing status of this AOI TRUE : Being executed. FALSE : Not being executed.
Error	Boolean
Error	Error presence TRUE: This AOI ended abnormally. FALSE : This AOI ended successfully.
ErrorID	Integer
ErrorID	Error location 2800 : The error occurred in the PLC program. 2801 : The error occurred in the robot controller.
ErrorIDEx	DInt
ErrorIDEx	Error Code This is a number to identify the error description. For details, refer to "Error code list".

Function Description

About Current Limiting Function: This function sets compliance for individual axes. Limiting the torque of motors for individual axes realizes compliance. Use this function to prevent an excessive force applied to a robot or a work, or to avoid a down due to over load or over current.

Attention

To execute this AOI, AOI with the AOI category "Motion" needs to be made executable.
To make AOI with the AOI category "Motion" executable, use the AOI "MC_Power".

ID : 7386

<< Prev Next >>