HOME
ID : 5801
VRC Setting
Operation path : [F6 Setting]-[F2 System info]-[General]-[F6 VRC Setting]
This section describes how to set the VRC.
Pressing [F6 VRC Setting] will display the [VRC Setting] window as shown below.
To edit the items of the [F6 VRC Setting], the log-in level needs to be the Maintainer.
| Available function keys | |
|---|---|
| [F1 Prev] | Display the previous page of the currently displayed contents. |
| [F2 Next] | Display the next page of the currently displayed contents. |
| [F3 Jump To] | Display numeric keypad. Enter S.M.A.R.T. info. number with numeric keypad, and press [OK] to move to the selected number. The selected number is highlighted. To select a number, jog dial and up and down cursor keys are also available. |
| [F5 Edit] | Select a parameter that you want to change, and then press [F5 Edit]. Once a dialog box is displayed, select a desired item, and then press [OK] on the dialog box. The changed value is confirmed by pressing [OK] on the [VRC Setting] window. |
Parameters displayed in the VRC Setting window
| No. | Item Name | Range | Value |
|---|---|---|---|
| 1 | Record Err Level | 0 to 5 | Set an error level for the error logging. An error where the error level is equal to or higher than this selection will be recorded. 0 : Level0 (Default) 1 : Level1 2 : Level2 3 : Level3 4 : Level4 5 : Level5 |
| 4 | Language mode | 0 to 4 | Set the display language for pendant. 0 : Japanese 1 : English (Default) 2 : German 3 : Korean 4 : Chinese |
| 32 | Slave mode command limit set | 0,1 | This parameter is used to restrict available commands under the slave mode. Selecting "1: Enable" will restrict the commands.
0 : Disable (Default) 1 : Enable |
| 36 | Area check mode | 0,1 | Select the way to check an area. Divide (old version) and CheckAll (the latest version) are available. As from Ver.1.8.*, this item is set to "1:CheckAll" at the default to support high-speed processing. The old version (Divide) is available by selecting "0: Divide". 0 : Divide 1 : CheckAll (Default) |
| 37 | Program priority mode set when starting. | 0,1 | Set to enable or disable the Program priority mode at the controller startup. * Enable this item when an error [81201001 Watchdog time over] occurs. 0 : Disable (Default) 1 : Enable |
ID : 5801