<< Prev        Next >>

ID : 7350

MC_MoveLinearRelative

To move the robot to the target position by linear interpolation control. Specify the travel distance from the current position for the target position with a cartesian coordinate system (Position type).

Graphic expression AOI category
Motion

Input and Output Variable

Variable name Data type Valid range Conditions for Input and Output
AxesGroup eRC_AxesGroup -
Robot group
Specify a robot variable (structured type data : eRC_AxesGroup) of user-defined type.
Position eRC_Position For input
Target position
Specify the target position with a cartesian coordinate system (Position type). The units are as follows:
X, Y, Z : "mm"
RX, RY, RZ : "Deg"
FIG : "-"
J5 to J8 : Rotation axes "Deg" / Linear motion axes "mm"

Even if the target value is set to an axis that does not exist in the controlled robot, the robot controller ignores the value. For example, if a value is set to the variable "RX" when a four-axis robot is controlled, the robot controller controls the robot without using the value (variable "RX").
CoordSystem eRC_CoordSys
  • Tool : 0 to 63
  • Work : 0 to 7
 For input
Target position
Specify the tool coordinate system and the work coordinate system used when making the robot motion with a coordinate number.
In addition to valid range values, -1 can be used.
When -1 is specified, the robot motions at the coordinate system currently set.
For example, if -1 is set to the variable "Tool", the robot motions at the tool coordinate system of the tool number currently set.

Input Variable

Variable name Data type Valid range
Execute Boolean
  • TRUE : Start
  • FALSE : -
Execution start
When the variable is changed from FALSE to TRUE, this AOI is executed.
Velocity Real 0.1 to 100.0
Internal speed
Specify the internal speed used when moving to the target position. The unit is "%".
In addition to valid range values, -1 and 0 can be used.
-1 : The robot moves at the current internal speed.
0 : The minimum valid range value "0.1" is applied.
Acceleration Real 0.0001 to 100.0
Internal acceleration
Specify the internal acceleration used when moving to the target position. The unit is "%".
In addition to valid range values, -1 and 0 can be used.
-1 : The robot moves at the current internal acceleration.
0 : The minimum valid range value "0.0001" is applied.
Deceleration Real 0.0001 to 100.0
Internal deceleration
Specify the internal deceleration used when moving to the target position. The unit is "%".
In addition to valid range values, -1 and 0 can be used.
-1 : The robot moves at the current internal deceleration.
0 : The minimum valid range value "0.0001" is applied.
BufferMode Integer 0, 1, 6, 7, 8, 9
Buffer mode selection
Specify how to connect motions when this AOI is executed when the robot is in motion.
The process flow of each buffer mode is as follows:
[0 : Aborting OP0]
  1. The robot decelerates at 100% deceleration.
  2. The robot stops (End motion)
  3. This AOI motion is executed.
[1 : Buffered]
  1. The robot moves to the current target position.
  2. The robot stops (Encoder value check motion (Axes coordinate system)).
  3. This AOI motion is executed.
[6 : Blending]
  1. The robot moves to the vicinity of the current target position.
  2. The robot executes the motion end method specified in the input variable "TransitionMode".
  3. This AOI motion is executed.
[7 : Aborting OP1]
  1. The robot decelerates at 100% deceleration.
  2. The robot does not stop (Pass motion).
  3. This AOI motion is executed.
[8 : Aborting OP2]
  1. The robot decelerates at the current deceleration.
  2. The robot stops (End motion).
  3. This AOI motion is executed.
[9 : Aborting OP3]
  1. The robot decelerates at the current deceleration.
  2. The robot does not stop (Pass motion).
  3. This AOI motion is executed.
TransitionMode Integer 0, 3, 10, 11
Transition mode selection
Specify how to end the current motion when "6 : Blending" is selected in the input variable "BufferMode". The end method for each value is as follows:
[0 : The robot stops (Encoder value check motion (Axes coordinate system))]
[3 : The robot does not stop (Pass motion of distance designation)]
If 3 is selected, specify a distance to start the pass motion in the input variable "TransitionParameter".
[10 : The robot does not stop (Pass motion)]
[11 : The robot stops (Encoder value check motion (Cartesian coordinate system))]
TransitionParameter Integer 0 to 32767
Target position
Specify a distance to start the pass motion when "3 : The robot does not stop (Pass motion of distance designation)" is selected in the input variable "TransitionMode". Unit is millimeter.
When the distance between the robot position and the current target position is below the value of this variable ("TransitionParameter"), the pass motion starts.

Output Variable

Variable name Data type / Description
Done Boolean
Execution completion confirmation
TRUE : This AOI execution is completed.
FALSE : This AOI execution is not completed.
NextActionPermit Boolean
Next motion permission
This variable indicates whether or not another AOI is allowed to be executed.
TRUE : Execution allowed.
FALSE : Execution not allowed.
To connect this AOI motion to the next AOI motion, enter this variable ("NextActionPermit") in the input variable "Execute" of the next AOI.
Busy Boolean
Processing status of this AOI
TRUE : Being executed.
FALSE : Not being executed.
Active Boolean
Robot control in progress
This variable indicates whether or not this AOI is controlling the robot.
TRUE : Controlling.
FALSE : Not controlling.
CommandAborted Boolean
Robot control aborted
This variable indicates whether or not this AOI was aborted while the robot was being controlled.
TRUE : Aborted.
FALSE : Not aborted.
Error Boolean
Error presence
TRUE: This AOI ended abnormally.
FALSE : This AOI ended successfully.
ErrorID Integer
Error location
2800 : The error occurred in the PLC program.
2801 : The error occurred in the robot controller.
ErrorIDEx DInt
Error Code
This is a number to identify the error description.
For details, refer to "Error code list".

Function Description

About Linear interpolation control
Linear interpolation control manages interpolation so that the path to reach the motion destination position will be a straight line.
The figure below shows an example of motion by linear interpolation control.

Attention

To execute this AOI, AOI with the AOI category "Motion" needs to be made executable.
To make AOI with the AOI category "Motion" executable, use the AOI "MC_Power".

ID : 7350

<< Prev        Next >>